Specifications; Intended Use - Makita TM30D Instruction Manual

SPECIFICATIONS

Model:
Oscillation per minute
Oscillation angle, left/right
Rated voltage
Battery cartridge
Overall length
Net weight without dust extraction
attachment
with dust extraction
attachment
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.

Intended use

The tool is intended for sawing and cutting wood,
plastic, gypsum, non-ferrous metals, and fastening
elements (e. g. unhardened nails and staples). It is also
intended for working soft wall tiles, as well as dry sand-
ing and scraping of small surfaces. It is especially for
working close to edge and flush cutting.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Work mode: Sanding
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
Sound power level (L ) : 93 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Work mode: Cutting with segmental saw blade
Sound pressure level (L
Sound power level (L ) : 92 dB(A)
WA
) : 75 dB(A)
pA
) : 82 dB(A)
pA
) : 81 dB(A)
pA
6,000 - 20,000 min
1.6° (3.2° total)
D.C. 10.8 V - 12 V max
BL1016, BL1021B
277 mm
1.1 kg
1.2 kg
Uncertainty (K) : 3 dB(A)
Work mode: Scraping
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
WARNING:
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode: Sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: Cutting with plunge cut saw blade
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: Cutting with segmental saw blade
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: Scraping
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
2 ENGLISH
TM30D
-1
BL1041B
296 mm
1.2 kg
1.3 kg
) : 81 dB(A)
pA
) : 92 dB (A)
WA
Wear ear protection.
2
) : 2.5 m/s or less
h
2
2
) : 10.5 m/s
h
2
2
) : 5.5 m/s
h
2
2
) : 9.0 m/s
h
2
The vibration emission during actual
Be sure to identify safety measures