ENGLISH (Original instructions) SPECIFICATIONS Model TM3000C Oscillation per minute 6,000 - 20,000 (min 1.6 ゚ (3.2 ゚ total) Oscillation angle, left/right Overall length 275 mm without dust extraction attachment 1.4 kg Net weight with dust extraction attachment 1.5 kg Safety class •...
Page 3
EC Declaration of Conformity Keep children and bystanders away while operating a power tool. Distractions can cause Makita declares that the following Machine(s): you to lose control. Designation of Machine: Electrical safety Multi Tool Power tool plugs must match the outlet.
Personal safety 22. Maintain power tools. Check for misalignment Stay alert, watch what you are doing and use or binding of moving parts, breakage of parts common sense when operating a power tool. and any other condition that may affect the Do not use a power tool while you are tired or power tool’s operation.
Page 5
Avoid cutting nails. Inspect workpiece for any 22. Keep bystanders a safe distance away from nails and remove them before operation. work area. Anyone entering the work area Hold the tool firmly. must wear personal protective equipment. Make sure application tool Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate...
FUNCTIONAL DESCRIPTION ASSEMBLY WARNING: CAUTION: Always be sure that the tool is switched off and Always be sure that the tool is switched off and • • unplugged before adjusting checking unplugged before carrying out any work on the tool. function on the tool.
1. Application tool installation bolt 2. Holes in the application tool 3. Adapter 4. Protrusions of the tool flange 012850 012853 When using application tools with a different type of Apply a sanding paper on the workpiece. installation section, use a correct adapter (optional accessory).
3. Holes If you need any assistance for more details regarding 013052 these accessories, ask your local Makita Service Center. Install joint, dust nozzle and dust attachment. • Segment saw blade Install the nozzle band on the tool so that its •...