Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita TM30DSAE
Summary of Contents for Makita TM30DSAE
- Page 1 INSTRUCTION MANUAL Cordless Multi Tool TM30D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: TM30D Oscillation per minute 6,000 - 20,000 min Oscillation angle, left/right 1.6° (3.2° total) Rated voltage D.C. 10.8 V - 12 V max Battery cartridge BL1016, BL1021B BL1041B Overall length 277 mm 296 mm Net weight without dust extraction 1.1 kg 1.2 kg attachment... -
Page 3: Ec Declaration Of Conformity
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium ication. Use personal protective equipment. Always wear eye protection. - Page 4 Keep cutting tools sharp and clean. Make sure the application tool is not contact- maintained cutting tools with sharp cutting edges ing the workpiece before the switch is turned are less likely to bind and are easier to control. Use the power tool, accessories and tool bits Keep hands away from moving parts.
-
Page 5: Functional Description
Makita warranty for the Makita tool and charger. sure no one is below when using the tool in high locations. -
Page 6: Battery Protection System
Indicator lamps Remaining battery cartridge with the groove in the housing and slip capacity it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator on the Lighted upper side of the button, it is not locked completely. -
Page 7: Overload Protection
Adjusting the orbital stroke rate ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing application tool Optional accessory WARNING: Do not install application tool upside down. -
Page 8: Operation
OPERATION WARNING: Before starting the tool and during operation, keep your hand and face away from the application tool. CAUTION: Do not apply excessive load to the tool which may cause a motor lock and stop the tool. CAUTION: Do not operate the tool with press- ing the battery cartridge against the tool. -
Page 9: Maintenance
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. Centers, always using Makita replacement parts. Fig.13 1. Dust nozzle 2. Joint 3. Dust attachment 4. Nozzle band 5. Holes in the tool 6. Felt ring 7. -
Page 10: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool accessories or attachments might present a risk of for its stated purpose. If you need any assistance for more details regard- Center. NOTE: differ from country to country. - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com...
Need help?
Do you have a question about the TM30DSAE and is the answer not in the manual?
Questions and answers