Heinner HWM-M7012HA+++ Manual page 21

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
www.heinner.com
WARNING!
Pull out the power plug to avoid electrical shock before washing.
After using the washing machine, pull out the power cord and close the door tightly to avoid
pinching the kids.
Remove foreign matters
Drain Pump Filter:
Drain pump filter can filter the yarns and small foreign matters from the washings. Clean the filter
periodically to ensure the normal operation of washing machine.
WARNING!
First, drain the water with drain pump and then open the drain pump to clean away foreign matters
from drain pump filter.
Take care if the drained water is hot.
Cleaning the pump
Important!
According to the soil level within the cycles and the frequency of the cycles,you have to inspect and
clean the filter regularly.
The pump should be inspected if the machine does not empty and/or spin;
The machine makes an unusual noise during draining due to objects such as safety pins,coins etc.
blocking the pump.
The service panel proceed as follows:
1.After the power is disconnected, use hand to open the filter cover.
2.Turn the filter down as shown with the figure and take out sundries matters.
3.Reinstall each part back after sundries matters are removed.
Warning!
When the appliance is in use and depending on the programme selected there can be hot water in
the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has
finished the cycle, and is empty. When replacing the cover, ensure it is securely retight end so.
20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HWM-M7012HA+++ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents