Curtis 1313 User Manual page 23

8 — PROGRAMMING MENU: Save .cpf File
softkey at this point, to accept the automatic file name, or you can use the
keyboard to give the file a new name. See Section 13 for more information
about using the keyboard.
If you start the saving procedure by selecting "New Folder", first you will be
shown the keyboard screen and given the opportunity to accept the automati-
cally assigned name ("Folder") or to create a new name. When you are finished,
press the "OK" softkey.
Next, when you press the "Save as .." softkey, you will see the keyboard
screen again and this time you will be naming the .cpf file that will be saved
inside the new folder.
While the new .cpf file is being saved, you will see progress bars; in this example,
the "2/6" above the right end of the bar means this is the second of six bars.
This screen will inform you when the save is complete:
Note: You cannot delete .cpf files while in the Programming menu. To delete
a .cpf file, use the File Manager menu; see Section 11.
21
1313 Handheld Programmer Manual
,
Rev. B