5.4.10 Clean The Powder Hopper - WMF 9000S+ User Manual

Care
™ Allow bean hoppers to dry completely
™ Refill and replace bean hoppers
™ Lock with the multitool by turning clockwise

5.4.10 Clean the powder hopper

Cleaning will be more frequent depending on powder
consumption.
™ Slide the operating panel upward
The ON/OFF switch is on the right side, behind the
operating panel.
™ Press the ON/OFF switch until coffee machine
switches off
™ Disconnect mains plug
™ Use the multitool to turn the lock on the powder
hopper counterclockwise to open it
™ Tip hopper backwards and remove upwards
™ Empty hopper completely
™ Unscrew union nut at front and rear
™ Pull out the dosing auger
™ Thoroughly wipe out hopper with a damp cloth
™ Thoroughly clean individual dosing auger
components
™ Allow powder hopper and individual components to
dry completely
™ Re-assemble and replace the dosing auger and
screw on union nuts
Ensure correct orientation of discharge.
™ Refill and replace powder hopper
™ Use the multitool to rotate the lock clockwise to
close it
76
Portioner with individual parts.
Dosing auger
iMportant
User Manual WMF 9000 S +