Milk Foam Selection; Logo - WMF 9000S+ User Manual

Milk foam selection

Options: • active
Default value:

Logo

Manufacturer's logo
Options: • active
Default value:
active The manufacturer's logo is shown at the top
left of the ready-to-operate display.
Customer logo
Options: • active
Default value:
active When the option is set to "active" and
a customer logo has been downloaded, the
customer logo is shown at the center of the
header line when ready to operate. When
vending devices are connected, it shows
the customer logo. In this case, both logos
cannot be displayed.
Load customer logo
Insert the USB stick containing the customer logo.
Load the customer logo.
Size of customer logo
The logo must not be greater than 80 pixels high.
Larger logos will be scaled to this size automatically.
User Manual WMF 9000 S +
Software | Operating options
• inactive
active
• inactive
active
• inactive
inactive
Milk foam selection is possible only
with Auto Steam option.
47