Software | Care
Enable milk system
During cleaning, the system asks whether milk
beverages should be enabled after cleaning. If "no"
is selected, then only beverages without milk will be
available afterward.
"Enable milk system" means that milk beverages will be
available again.
Foamer rinsing
Foamer rinsing is an intermediate cleaning process for
the milk foamer.
CleanLock
Touch
CleanLock
A 15-second countdown starts.
The touch display can now be cleaned.
The touch display is activated again 15 seconds after
the last time it was touched.
instructions
Animated instructions about the available cleaning
programs and for installing and removing the mixer
and combi spout for cleaning.
Milk system refill
This function fills the milk system for dispensing cold
beverages.
Milk system refill
Touch
Drip tray cleaning
The cup table moves upward when the "Drip tray
cleaning" pad is touched. The drip tray can then be
cleaned.
32
DS_MS_freigeben
Enable milk system
DS_Schaeumerspuelung
Foamer rinsing
wCare
page 68
DS_CleanLock
Clean the operating panel
wCare
starting on page 69
DS_Anleitungen
DS_Milchsystembefuellung
DS_Reinigung_Tropfschale
Drip tray cleaning
Clean drip tray
wCare
page 70
User Manual WMF 9000 S +
Foamer rinsing
CleanLock
Instructions
Milk system refill