Table of Contents
Advertisement
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-fanvil-a1
Set proxy server IP address>Usually, Register SIP
Server configuration is the same as Proxy SIP
Proxy Server
Server. But if your VoIP service provider give
Address
different configurations between Register SIP
Server and Proxy SIP Server, you need make
different settings.?
Proxy Server Port
Set your Proxy SIP server port.
Proxy Username
Input your Proxy SIP server account.
Proxy Password
Input your Proxy SIP server password.
Set the sip domain if needed, otherwise this VoIP
Domain Realm
gateway will use the Register server address as sip
domain automatically. (Usually it is same with
registered server and proxy server IP address).
Enable Register
Start to register or not by selecting it or not.
Set expire time of SIP server register, default is 60
Register Expire
seconds. If the register time of the server requested
Time
is longer or shorter than the expire time set, the
gateway will change automatically the time into the
time recommended by the server, and register
again.
NAT Keep Alive
Set examining interval of the server, default is 60
Interval
seconds
User Agent
Set the user agent if have, the default is VoIP Phone
1.0
Signal Key
Set the key for signal encryption
Media Key
Set the key for RTP encryption
Local port
Set sip port of each line
Ring type
Set ring type of each line
Hot line Number
Set hot line number of each line
Conference
Configure conference number in server conference.
Number
Transfer Expire
For the gateway supports the transfer of certain
Time
special features server, set interval time between
sending "bye" and hanging up after the phone
transfers a call.
Enable subscribe
Enable the option ,the gateway will receive the
notify from the server.
Enable Keep
Enable/Disable Keep Authentication System will
Authentication
take the last authentication field which is passed the
authentication by server to the request packet. It will
decrease the server's repeat authorization work, if it
is enable.
Enable/Disable keeps NAT of SIP alive.
NAT Keep Alive
If some server refuse to register with too short
Advertisement
Table of Contents
