Fanvil A1 User Manual page 22

http://arttel.ru
RTP Initial Port
RTP Port Quantity
Notice:
1? You need save the configuration and reboot the gateway after set this page.
2?If you modify the port of Telnet and HTTP, you would better set the value
3?if you set 0 for the HTTP port, it will disable HTTP service.
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-fanvil-a1
Field name
set web browse port, the default is 80 portBif you want
to enhance system safetyByou'd better change it into
HTTP Port
non-80 standard portQ
Example: The IP address is 192.168.1.70. and the port
value
http://192.168.1.70:8090
Telnet Port Set Telnet Port, the default is 23. You can change the
value into others.
Example:
The IP address is 192.168.1.70. the telnet port value is
8023, the accessing address is telnet 192.168.1.70 8023
Set the RTP Initial Port. It is dynamic allocation.
Set the maximum quantity of RTP Port, the default is
200.
more than 1024 because the port value less than 1024 is system port
reserved.
SERVICE PORT
explanation
is 8090, the accessing address is