Simulating Your Flight - senseFly EBEE RTK Extended User Manual

Quick start guide
Caution: eMotion as well as the automatic mission planning tool are
not aware of any obstacles that may exist in the area. In addition,
when not using elevation data, the mission planning tool assumes
that the mission area is flat and at the same altitude than the take-off
location. It is also not aware of any legal restriction (such as minimum
or maximum altitude) that may exist in your region. The resulting
flight plan should be carefully reviewed in order to avoid any collision
with uneven terrain or tall objects such as buildings, and to comply
with local regulations.
The final step after you have prepared a flight plan is to save it to a file that you
can load into the eBee RTK when you are in the field. Select the Setup Phase tab
from the Sidebar, click on 'Save flight plan to file... ' , choose a filename and location
and click 'Save' .
1.5 Simulating your flight
Simulating your flight gives you an idea of the position and size of images that
will be taken during the flight. In addition, it allows you to learn to use advanced
functions, such as in-flight waypoint editing and camera control, without putting
your eBee RTK at risk³. When eMotion is connected to a simulated drone an extra
set of buttons appear in the Sidebar:
fast-forward
play
pause
You can set the take-off location of the eBee RTK by clicking on the
placing the point on the map. This simulates the action of switching on the real
³ see section 'Simulator' on page 107 for a complete description of the simulator
28
re-position take-off location
initiate take-off
instant recharge of battery
icon and