senseFly EBEE RTK Extended User Manual page 165

Drone flight log
malfunction
Flight controller
malfunction
Camera sync
malfunction
There is an error saving data to the on-board mem-
ory card which will prevent the images from being
geo-tagged. Images may still be geo-tagged using
the eMotion Flight Log file but may be less precise.
Security action: The drone continues normal flight.
User action: Land as soon as possible. Once on the
ground, connect to the on-board memory card as de-
scribed in section 'Importing images and flight data'
on page 61 and re-format the memory card.
The flight controller has encountered an unexpected
state, such as an incorrect waypoint type.
Security action: The drone flies towards the Home
waypoint at an altitude defined by the Home way-
point's Change altitude parameter (by default, set to
'Highest').
User action: Land as soon as possible and re-start
the drone. If the problem persists, contact your
eBee RTK reseller.
There is a problem with the wiring of the on-board
camera.
Security action: If required parameter set in the
Flight Parameters tab, the drone flies towards the
Home waypoint at an altitude defined by the Home
waypoint's Change altitude parameter (by default,
set to 'Highest'). Otherwise it continues its mission
without taking further images.
User action: Land as soon as possible and re-start
the drone. Reset the camera settings as described
in section 'Resetting default camera settings' on
page 179.
Troubleshooting
165