∗
Strong wind
Cannot maintain
altitude
The wind is too strong for the eBee RTK to navigate
safely.
Security action (if enabled): The eBee RTK flies to-
wards the Home waypoint at an altitude defined by
the Home waypoint's Change altitude parameter (by
default, set to 'Highest').
User action: Land as soon as possible and wait for
better flight conditions.
The eBee RTK cannot maintain the altitude that is
commanded by the flight controller. This may be due
to a damaged motor, airframe or ailerons or a strong
vertical wind.
Security action: The drone continues normal flight.
User action: If the condition persists during a flight,
land and wait for the wind to decrease, as explained
in section 'Weather check' on page 40. If the prob-
lem occurs in low-wing conditions perform Check 2
in section 'Full airframe and sensor inspection' on
page 151.
Troubleshooting
175