Faq (Frequently Asked Questions) - Siemens CP 5613 A2 Product Information

4

FAQ (Frequently Asked Questions)

Overview
In this chapter, you will find the answers to typical questions (Frequently Asked
Questions) about product properties.
What do the LEDs mean?
Green and yellow LED
green lit
green off
green flashing at one second
intervals
green and yellow flashing
alternately
yellow lit
yellow off
green flashing fast
green and yellow flashing
synchronously
one of the two LEDs is on
the other flashes fast.
Does the module have the CE mark?
Yes, refer to the Appendix, page 43.
Which approvals do the CP 5613 A2 and CP 5614 A2 have for USA and Canada?
● cULus — Combined UL and CSA approval
● FCC Class B
Product Information/Installation Instructions CP 5613 A2, CP 5614 A2
A5E00779184
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Product Information/Installation Instructions CP 5613 A2, CP 5614 A2
DP master: Indicates token rotation (in other
words, normal operation)
DP master: Incorrect bus parameters, defective
bus, or CP not in operation
DP master: Errors in database
Module being addressed by the diagnostic tool to
check the installation.
DP slave: Indicates polling by the DP master (in
other words, normal operation)
DP slave: Port not being addressed.
Module not started (normal state after reset).
Exception state (error in firmware)
Error initializing the module.
Meaning
37