Siemens CP 5613 A2 Product Information page 37

Product Information/Installation Instructions CP 5613 A2, CP 5614 A2
Steps continued from previous page
6 Secure the module and close your computer as described in the man-
ual for your computer.
7 Reconnect all the cables to the computer except for the PROFIBUS
cable(s) and turn on your computer.
8 Read the information in the document "Commissioning PC Stations".
Note 1
There are no hardware settings necessary on the module itself.
Note 2
If a module is inserted in a module slot, that is designed for a higher clock rate than
the module, the clock rate adapts to the inserted module.
CP 5613 A2 and CP 5614 A2 are designed for a 66 MHz PCI bus clock rate.
If the CP 5613 A2 or CP 5614 A2 is operated in a PCI-X slot, the bus clock rate in
this PCI-X segment is automatically reduced to 66 MHz.
The bus clock rate of the CP 5613 A2 or CP 5613 A2 is reduced to 33 MHz if there
is another module on the same bus that can only operate at 33 MHz.
Notice
The communications processors CP 5613 A2 and CP 5614 A2 are supported as of
version CD 11/2003 (V6.2) of the SIMATIC NET product CD or Developer Kit V3.1.
36
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Product Information/Installation Instructions CP 5613 A2, CP 5614 A2
A5E00779184