Siemens CP 5613 A2 Product Information page 27

Classification of Safety-Related Notices
This document contains notices which you should observe to ensure your own personal
safety, as well as to protect the product and connected equipment. These notices are
highlighted in the manual by a warning triangle and are marked as follows according to
the level of danger:
Danger
indicates that death or severe personal injury will result if proper precautions are not
taken.
Warning
indicates that death or severe personal injury can result if proper precautions are not
taken.
Caution
with a warning triangle indicates that minor personal injury can result if proper precau-
tions are not taken.
Caution
without a warning triangle indicates that damage to property can result if proper precau-
tions are not taken.
Notice
indicates that an undesirable result or status can occur if the relevant notice is ignored.
Note
highlights important information on the product, using the product, or part of the docu-
mentation that is of particular importance and that will be of benefit to the user.
Copyright Siemens AG 2006, All rights reserved
The reproduction, transmission or use of this document or its contents
is not permitted without express written authority. Offenders will be
liable for damages. All rights, including rights created by patent grant
or registration of a utility or design, are reserved.
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
Geschäftsgebiet Industrie-Automatisierungssysteme
Postfach 4848, D-90327 Nürnberg
Siemens Aktiengesellschaft
26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Disclaimer
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However, the
data in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for
improvement are welcome.
A5E00779184
© Siemens AG 2006
Technical details subject to change.
Printed in the Federal Republic of Germany