Cp 5613 A2 - Siemens CP 5613 A2 Product Information

2.1.1

CP 5613 A2

Properties of the CP 5613 A2
The CP 5613 A2 is a PCI card for connecting PCs to PROFIBUS. The essential
characteristics are as follows:
● Optimized for the fast DP master mode (DP-Base) with up to 124 DP slaves re-
taining full data consistency
● Event mechanisms to reduce load on the PC (automatic detection of data
changes)
● Fast logic support independent of the application (automatic logical linking of
input and output data can be set by the user program)
● Plug-and-Play support when installing the hardware
● All data transmission rates from 9.6 Kbps to 12 Mbps supported
● Floating RS-485 attachment
● Support for PCI 3.3V/5V, 33 MHz/66 MHz, 32 bit/64 bit and PCI-X 66 MHz, 32
bit/64 bit
CP 5613 A2
The picture below shows the CP 5613 A2 communications processor.
Product Information/Installation Instructions CP 5613 A2, CP 5614 A2
A5E00779184
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Product Information/Installation Instructions CP 5613 A2, CP 5614 A2
33