Vibration - Makita 9561CH Angle Grinder

Vibration

The vibration total
determined according to EN60745:
Model 9561CVH
Work mode : surface grinding with normal side
grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model 9562CH, 9562CVH
Work mode : surface grinding with normal side
grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : surface grinding with anti vibration
side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model 9564CV
Work mode : surface grinding with normal side
grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : surface grinding with anti vibration
side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model 9565C, 9565CV
Work mode : surface grinding with normal side
grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : surface grinding with anti vibration
side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
value (tri-axial vector
2
) : 8.5 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
2
) : 8.5 m/s
h,AG
2
2
) : 7.5 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
2
) : 8.0 m/s
h,AG
2
2
) : 8.0 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
2
) : 8.0 m/s
h,AG
2
2
) : 7.5 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
ENG900-1
The declared vibration emission value has been
•
sum) measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
The declared vibration emission value is used for
•
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: 9561CVH, 9562CH, 9562CVH,
9564CV, 9565C, 9565CV
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
000331
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
5
28.2.2015
Yasushi Fukaya
Director
ENG902-1
ENH101-18