Angle Grinder MODEL 9560C MODEL 9564C MODEL 9560CV MODEL 9564CV MODEL 9563C MODEL 9562C MODEL 9563CV MODEL 9562CV MODEL 9561C MODEL 9565C MODEL 9561CV MODEL 9565CV 001005 DOUBLE INSULATION I N S T R U C T I O N...
The tool should be connected only to a power supply of Director the same voltage as indicated on the nameplate, and MAKITA INTERNATIONAL EUROPE LTD. can only be operated on single-phase AC supply. They Michigan Drive, Tongwell, Milton Keynes, Bucks MK15...
SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. For safe operations: tion and changing accessories.
ADDITIONAL SAFETY RULES ENB031-6 13. Hold the tool firmly. Always use eye and ear protection. Other per- sonal protective equipment such as dust mask, 14. Keep hands away from rotating parts. gloves, helmet and apron should be worn. 15. Make sure the wheel is not contacting the work- Always be sure that the tool is switched off and piece before the switch is turned on.
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock 002978 CAUTION: • Never actuate the shaft lock when the spindle is moving. The tool may be damaged.
The tools equipped with electronic function are easy to operate because of the following features. • Electronic constant speed control Possible to get fine finish, because the rotating speed is kept constantly even under the loaded condition. • Soft start feature Soft start because of suppressed starting shock.
Installing or removing depressed center grinding wheel/ 001071 Multi-disc (accessory) Mount the inner flange onto the spindle. Fit the wheel/disc on the inner flange and screw the lock nut onto the spindle. 1. Lock nut 2. Depressed center grinding wheel/ Multi-disc 3.
CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.