Download Print this page

Makita 9560CV Instruction Manual

100 mm (4”), 115 mm (4-1/2”), 125 mm (5”).
Hide thumbs

Advertisement

Angle Grinder
100 mm (4")
MODEL 9560CV
100 mm (4")
MODEL 9563CV
115 mm (4-1/2")
MODEL 9561CV
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
w w w . m a k i t a t o o l s . c o m
115 mm (4-1/2")
MODEL 9564CV
125 mm (5")
MODEL 9565CV
DOUBLE
INSULATION
M A N U A L

Advertisement

   Summary of Contents for Makita 9560CV

  • Page 1

    Angle Grinder 100 mm (4”) MODEL 9560CV 100 mm (4”) MODEL 9563CV 115 mm (4-1/2”) MODEL 9561CV I N S T R U C T I O N WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    SPECIFICATIONS Model 9560CV No load speed 2,800-10,500/ (RPM) 289 mm Overall length (11-3/8”) Net weight 1.7 kg (3.7 lbs) 1.7 kg (3.7 lbs) 1.8 kg (4.0 lbs) 1.8 kg (4.0 lbs) 1.8 kg (4.0 lbs) Spindle thread M10 x 1.25 •...

  • Page 3

    5. Avoid body contact with grounded sur- faces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

  • Page 4: Specific Safety Rules

    Not More Than SPECIFIC SAFETY RULES DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to grinder safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. 1. Always use proper guard with grinding wheel.

  • Page 5

    Damage to these parts could result in wheel breakage. 9. NEVER use tool with wood cutting blades or other sawblades. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury. 10. Hold the tool firmly.

  • Page 6

    FUNCTIONAL DESCRIPTION 002978 1. Shaft lock 001035 1. Slide switch 001046 1. Speed adjusting dial CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock CAUTION: • Never actuate the shaft lock when the spindle is moving.

  • Page 7

    Number RPM (/min) 2,800 4,000 6,500 9,000 10,500 ASSEMBLY 002979 002980 1. Wheel guard 2. Bearing box 3. Screw 4. Lever CAUTION: • If the tool is operated continuously at low speeds for a long time, the motor will get overloaded and heated up. •...

  • Page 8: Inner Flange 35

    002981 1. Screw 002982 1. Lock nut 2. Depressed center grinding wheel/ Multi-disc 3. Inner flange 4. Spindle 001084 1. Lock nut wrench 2. Shaft lock 001096 1. Lock nut 2. Flex wheel 3. Plastic pad 4. Inner flange Loosen the lever on the wheel guard. Mount the wheel guard with the protrusion on the wheel guard band aligned with the notch on the bearing box.

  • Page 9: Lock Nut

    This can cause loss of control and kickback. • NEVER use tool with wood cutting blades and other sawblades. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury. CAUTION: •...

  • Page 10: Wire Wheel Brush

    001229 1. Wire wheel brush grinder in the B direction or it will cut into the workpiece. Once the edge of the wheel has been rounded off by use, the wheel may be worked in both A and B direction.

  • Page 11

    A cut-off wheel can also be used with an optional guard. If you decide to use your Makita grinder with approved accessories which you purchase from your Makita distributor or factory service center, be sure to obtain and use all necessary fasteners and...

  • Page 12: Table Of Contents

    9560CV/9563CV Inner flange 35 Lock nut 10-35 Plastic pad Flex wheel Rubber pad 76 Sanding lock nut 10-30 Lock nut wrench 20 guards as recommended in this manual. Your failure to do so could result in personal injury to you and others.

  • Page 13

    First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold...

  • Page 14

    MAIL THIS PORTION Your answers to the following questions are appreciated. 1. This product was purchased from: Home Center Other ( Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply 2. Use of the product is intended for: Construction Trade Industrial Maintenance Home Maintenance Hobby Other (...

  • Page 15

    1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA FLORIDA 3707 E. Broadway Rd., Ste. 6 750 East Sample Road Phoenix, AZ 85040 Pompano Beach, FL 33064 (602) 437-2850 (954) 781-6333 CALIFORNIA GEORGIA 41850 Christy St. 4680 River Green Parkway NW Fremont, CA 94538-5107 Duluth, GA 30096 (510) 657-9881...

  • Page 16: Warranty Policy

    WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, •...

This manual also for:

9561cv, 9563cv, 9564cv, 9565cv

Comments to this Manuals

Symbols: 0
Latest comments: