Configuring The Ntp Source Interface; Configuring Ntp Logging - Cisco Nexus 9000 Series Configuration Manual

Configuring the NTP Source Interface

Configuring the NTP Source Interface
You can configure NTP to use a specific interface.
Procedure
Step 1
Step 2
Step 3

Configuring NTP Logging

You can configure NTP logging in order to generate system logs with significant NTP events. NTP logging
is disabled by default.
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 6.x
18
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
[no] ntp source-interface interface
Example:
switch(config)# ntp source-interface
ethernet 2/1
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
[no] ntp logging
Example:
switch(config)# ntp logging
show ntp logging-status
Example:
switch(config)# show ntp logging-status
Purpose
Enters global configuration mode.
Configures the source interface for all NTP
packets. Use the ? keyword to display a list
of supported interfaces.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
Enables or disables system logs to be generated
with significant NTP events. NTP logging is
disabled by default.
(Optional)
Displays the NTP logging configuration status.
Configuring NTP