Eem Events - Cisco Nexus 9000 Series Configuration Manual

Embedded Event Manager System Events and Configuration Examples
Event
__primary_bootrom
__pwr_mgmt_bus
__real_time_clock
__secondary_bootrom
__spine_control_bus
__standby_fabric_loopback
__status_bus
__system_mgmt_bus
__usb

EEM Events

The following table describes the EEM events you can use on the device.
EEM Event
application
cli
Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 6.x
Description
Do CallHome, log error, and disable further HM
testing after 20 consecutive failures of GOLD
"PrimaryBootROM" test
Do CallHome, log error, and disable further HM
testing for the module or spine-card after 20
consecutive failures of GOLD "PwrMgmtBus" test
Do CallHome, log error, and disable further HM
testing after 20 consecutive failures of GOLD
"RealTimeClock" test
Do CallHome, log error, and disable further HM
testing after 20 consecutive failures of GOLD
"SecondaryBootROM" test
Do CallHome, log error, and disable further HM
testing for that module or spine-card after 20
consecutive failures of GOLD "SpineControlBus"
test
Do CallHome, log error, and disable further HM
testing after 10 consecutive failures
Do CallHome, log error, and disable further HM
testing after 5 consecutive failures of GOLD
"StatusBus" test
Do Call Home, log error, and disable further HM
testing for that fan or power supply after 20
consecutive failures of GOLD "SystemMgmtBus"
test
Do Call Home and log error when GOLD "USB" test
fails
Description
Publishes an application-specific event.
CLI command is entered that matches a pattern with
a wildcard.
EEM Events
239