Writing And Editing Text - Gigaset S910 User Manual

Appendix
General specifications
WDCT
standard
WDCT
No. of channels
Radio frequency range 2402 MHz - 2483,5 MHz
Duplex method
Pulse repetition rate
Pulse transmission
length
Channel grid
Bit rate
Modulation
Language code
Transmission power
Range
Base power supply
Environmental condi-
tions in operation
Dialling mode
Bluetooth
Radio frequency range 2402–2480 MHz
Transmission power
Pin connections on the telephone
jack
3
2
1
68
Is supported
80 duplex channels
Time multiplex,
10 ms frame length
100 Hz
840 μs
864 kHz
576 kbit/s
GFSK
32 kbit/s
25 mW average power
per channel,
250 mW pulse power
Up to 300 m outdoors,
up to 50 m indoors
220 V ~/50 Hz
+5°C to +45°C, 20% to
75% relative humidity
DTMF (tone dialling)/
PD (pulse dialling)
4 mW pulse power
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused

Writing and editing text

The following rules apply when writing text:
u Each key between Q and O is
assigned several letters and characters.
u Control the cursor with u v t s.
Press and hold u or v to move the cur-
sor word by word.
u Characters are inserted at the cursor posi-
tion.
u Press the star key * to display the
table of special characters. Select the
required character and press the display
§Insert§
key to insert the character at the
cursor position.
u Press and hold Q to O to enter dig-
its.
Ñ
u Press display key
acter to the left of the cursor. Press and
hold to delete the word to the left of the
cursor.
u The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
Setting upper/lower case or digits
Repeatedly press the hash key # to
change the text input mode.
123 Writing digits
Abc Upper case *
abc Lower case
* First letter in capitals, all others in lower case
The active mode is indicated at the bottom
right of the screen.
to delete the char-