Handset Settings; Quickly Accessing Ip Number; Name Of The Handset - Gigaset S910 User Manual

Rejecting/accepting an
unregistered Bluetooth device
If a Bluetooth device that is not registered in
the list of known devices tries to connect
with the handset, you will be prompted on
the display to enter the PIN for the Bluetooth
device (bonding).
u Reject
a
Briefly press the end call key.
u Accept
~
Enter the PIN for the Bluetooth
device you want to accept and
§OK§
press
If you have accepted the device, you can
use it temporarily (i.e., as long as it is
within receiving range or until you deac-
tivate the handset) or save it to the list of
known devices.
Once the device's PIN has been con-
firmed
– Save to the list of known devices: press
§Yes§
display key
– Use temporarily: press display key
Changing the Bluetooth name of
the handset
You can change the handset name used to
identify it on the display of another Blue-
tooth device.
ò
v ¢
¢ Own Device
§Change§
Press the display key
~
Change the name.
§Save§
Press the display key
.
.
§No§

Handset settings

Your handset is preconfigured, but you can
change the settings to suit your individual
requirements.

Quickly accessing IP number

You can assign an IP number from the direc-
tory to the digit key Q.
The number is then inserted in the dial pre-
paration screen by simply pressing the key
Q.
Assigning digit key
Prerequisite: You have not yet assigned a
number to the digit key Q.
¤ Press and hold the digit key Q
or
Press the digit key Q briefly and press
the display key
The Directory opens.
.
¤ Select an entry and press
The entry is saved to the digit key Q.
Please note
If you delete or edit the entry in the
Directory at a later date, this will not
affect the assignment to the digit key.
Changing an assignment
When the handset is in idle status:
¤ Briefly press the digit key Q, than
press the display key
the assignment or to delete the assign-
ment.
Handset settings
Q
§QuickDial§
.
§OK§
.
§Change§
to change
55