Installation; Connecting The Video Inputs - Hall Research Technologies SC-1080H User Manual

Multi Input Digital Scaler with Audio

2. Installation

2.1

Connecting the Video inputs

The video scaler accepts both TV and PC inputs and scales them to your
desired high resolution format output. The TV inputs are composite video
(CV), S-Video (Mini-Din connector), YPbPr input (3 RCA connectors),
PC (HD15) and HDMI™.
Figure 2 - Rear Panel
S-Video: Use an S-Video cable to connect the S-Video output of the
source equipment to the connector labeled "S-Video" on the back of the
Video Scaler. The format can be NTSC or PAL. This channel accepts
stereo audio input via (2) RCA connectors.
Composite Video (CV): Use a Composite video cable to connect the
composite video output of the source equipment to the connector labeled
"CV" on the back of the Video Scaler. The format can be NTSC or PAL.
This channel accepts stereo audio input via (2) RCA connectors.
YPbPr: Use a 3 RCA-to-3 BNC YPbPr cable to connect the YPbPr
output of the source equipment to the device. The format can be NTSC
or PAL. This channel accepts stereo audio input via (2) RCA connectors.
PC input: Connect the source computer's VGA output signal to the
HD15 connector labeled "PC" on the device. This channel accepts stereo
audio input via a 3.5mm audio jack (TRS – Tip, Ring, and Sleeve).
HDMI™ input: Use an HDMI™ cable to connect the HDMI™ output of
the source equipment to the device. This channel accepts digital audio
input via HDMI or stereo audio via a 3.5mm audio jack (TRS – Tip, Ring,
and Sleeve).
5