Table of Contents
Advertisement
Electromagnetic Compatibility: This equipment complies with EMC Directive 89/336/EEC and
the published technical standards. Continued compliance requires installation in accordance
with these instructions and the use of manufacturer approved accessories only.
CAUTION:
Although your UPS has been designed and manufactured to assure personal safety,
improper use can result in electrical shock or fire. To insure safety, please observe the
following rules:
S
Turn off and unplug your UPS before cleaning. Do not use liquid or aerosol cleaners. A
dry cloth is recommended to remove dust from the surface of your UPS.
S
Do not install or operate your UPS in or near water.
S
Do not place UPS on an unstable cart, stand, or table.
S
Do not place UPS under direct sunlight or close to heat emitting sources.
S
Do not place UPS power cord in any area where it may get damaged by heavy objects.
S
Follow all warnings and instructions marked on the UPS. Do not attempt to service the
UPS, as it has no user-serviceable parts inside. Refer all repairs to qualified service
personnel.
ATTENTION:
Turn off and unplug your UPS from the outlet and contact qualified service personnel if:
S
The power cord or plug is damaged.
S
Liquid has been spilled on the UPS.
S
The fuse blows frequently.
S
The UPS does not operate even when user follows the operating instructions.
CONDITIONS OF USE:
Your UPS provides conditioned power to connected equipment. Maximum load must not
exceed that shown on UPS rating label. If uncertain, consult your distributor or Liebert.
Placing magnetic storage media on top of the UPS may result in data corruption.
3
Advertisement
Table of Contents
