Important Notices - Ikelite 200DL Manual

Important Notices

This housing requires a compatible Lens Port for waterproof
»
operation. The housing is not waterproof without a Lens Port
attached.
A bulkhead cap or sync cord must be attached to the housing
»
for waterproof operation. Never submerge the housing without
either a sync cord or waterproof bulkhead cap attached.
To prevent salt build-up and sticking controls, turn the camera
»
off and submerge the sealed housing in clean, freshwater.
Operate the controls several times each while underwater to
flush out any residue.
Never leave a housing in a rinse tank, even if it is the only
»
system in the tank. Most catastrophic floods happen when the
user walks away from a housing while it is in the rinse tank.
Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
»
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.
3