Important Notices - Ikelite 71301 Instructions Manual

Important Notices

This housing requires a compatible DL lens port for waterproof
»
operation (sold separately). The housing is not waterproof
without a DL lens port attached.
A bulkhead cap or sync cord must be attached to the housing
»
bulkhead for waterproof operation. Never submerge the
housing in water without either a sync cord or bulkhead cap
attached.
Do not pull the shutter trigger without a camera installed. You
»
may accidentally detach or damage the control spring.
Never leave a housing in a rinse tank, even if it is the only
»
system in the tank. Accidental damage may occur when the
user walks away from a housing while it is in the rinse tank.
Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
»
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.
If you will be using the system in strong surf it is
»
recommended to draw a vacuum on the housing using the
optional vacuum pump (sold separately).
3