Installing An Optional Zoom Gear (Not Included With Housing) - Ikelite 200DL Manual

6. Check the o-ring seal. The o-ring should form a uniform, solid line
around the back of the housing. There will be a small, even gap
around the housing between the housing back and the housing
front.
7. Check control functions.

Installing an Optional Zoom Gear (not included with housing)

1. Lay housing on its back and remove camera lens by rotating the
housing lens release control, see diagram, page 7.
2. Remove the Zoom Gear Retainer using the Zoom Gear Retainer
Tool.
3. Place Zoom Gear into the Port Mount hole opening with the gear
teeth facing the housing.
Zoom Gear
Retainer Tool
Zoom Gear
Retainer
Zoom Gear
Port Mount
15