Table of Contents
Advertisement
Important Notices
Never leave a housing in a rinse tank, even if it is the only
»
system in the tank. The vast majority of catastrophic floods
happen when the user walks away from a housing while it is in
the rinse tank.
To prevent salt build-up and sticking controls, submerge the
»
empty housing in clean, freshwater. Operate the controls
several times each while underwater to flush out any residue.
Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
»
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.
3
Advertisement
Table of Contents
