Important Notices; Accessory Port - Ikelite 6950.13 Manual

Important Notices

This housing requires a compatible Lens Port for waterproof
»
operation. The housing is not waterproof without a Lens Port
attached.
To prevent salt build-up and sticking controls, submerge the
»
empty housing in clean, fresh water. Operate the controls
several times each while underwater to flush out any residue.
Never leave a housing in a rinse tank, even if it is the only
»
system in the tank. Most catastrophic floods happen when the
user walks away from a housing while it is in the rinse tank.
Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
»
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.

Accessory Port

Do not remove the Accessory Port Hole Plug unless you are
»
installing a compatible accessory such as factory optional
Vacuum Kit # 47012.
Your housing features one 1/2-20 threaded Accessory Port which
may be used for attachment of factory optional or aftermarket housing
accessories. Visit ikelite.com for an updated list of factory optional
accessories.
3