Attaching The Lens Port Or Port Extension - Ikelite 200DL Manual

Attaching the Lens Port or Port Extension

1. Loosen each of the three Thumbscrews so at least 5 threads are
visible. The Thumbscrew should not protrude into the inside of the
port or extension.
Thumbscrew
Sealing
Surface
2. Make sure the O-ring and Sealing Surface are clean and free of lint,
dirt, or debris.
3. Lightly lubricate O-ring using ONLY Ikelite lubricant. Non-Ikelite
lubricant can cause the o-ring to swell and not seal properly.
Dome
Port
O-ring
Recess
Thumbscrew
O-ring
Port
Extension
Drain Hole
17