Table of Contents
Advertisement
TANDBERG Quick Set C20/C20 Plus and Profiles using C20
Contents
Contents
Introduction
Introduction
The H323 Profile settings
H323 Profile [1..1] Authentication LoginName
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec to the H.323
Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no
authentication is required, the system will still try to register. Requires the H.323 Gatekeeper Authentication
Mode to be enabled.
Valuespace: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example:
H323 Profile 1 Authentication LoginName: ""
H323 Profile [1..1] Authentication Password
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec to the H.323
Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no
authentication is required, the system will still try to register. Requires the H.323 Gatekeeper Authentication
Mode to be enabled.
Valuespace: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example:
H323 Profile 1 Authentication Password:
H323 Profile [1..1] Authentication Mode
Set the authentication mode.
Valuespace: <On/Off>
On: If the H.323 Gatekeeper Authentication Mode is set to On and a H.323 Gatekeeper indicates
that it requires authentication, the system will try to authenticate itself to the gatekeeper. Requires the
Authentication ID and Authentication Password to be defined on both the codec and the Gatekeeper.
Off: If the H.323 Gatekeeper Authentication Mode is set to Off the system will not try to authenticate
itself to a H.323 Gatekeeper, but will still try a normal registration.
Example:
H323 Profile 1 Authentication Mode: Off
D14637.01—MARCH 2010
Advanced config.
Advanced configuration
Advanced configuration
Password protection
Password protection
14
About monitors
About monitors
The H323 Profile settings,
cont...
H323 Profile [1..1] CallSetup Mode
The H.323 Call Setup Mode defines whether to use a Gatekeeper or Direct calling when establishing H323
calls.
NOTE! Direct H.323 calls can be made even though the H.323 Call Setup Mode is set to Gatekeeper.
Valuespace: <Direct/Gatekeeper>
Direct: An IP-address must be used when dialling in order to make the H323 call.
Gatekeeper: The system will use a Gatekeeper to make a H.323 call. When selecting this option the
H323 Profile Gatekeeper Address and H323 Profile Gatekeeper Discovery settings must also be
configured.
Example:
H323 Profile 1 CallSetup Mode: Gatekeeper
H323 Profile [1..1] Gatekeeper Address
Specifies the IP address of the Gatekeeper. Requires the H.323 Call Setup Mode to be set to Gatekeeper
and the Gatekeeper Discovery to be set to Manual.
Valuespace: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example:
H323 Profile 1 Gatekeeper Address: "10.47.1.58"
H323 Profile [1..1] Gatekeeper Discovery
Determines how the system shall register to a H.323 Gatekeeper.
Valuespace: <Manual/Auto>
Manual: The system will use a specific Gatekeeper identified by the Gatekeeper's IP-address.
Auto: The system will automatically try to register to any available Gatekeeper. If a Gatekeeper
responds to the request sent from the codec within 30 seconds this specific Gatekeeper will be used.
This requires that the Gatekeeper is in auto discovery mode as well. If no Gatekeeper responds, the
system will not use a Gatekeeper for making H.323 calls and hence an IP-address must be specified
manually.
Example:
H323 Profile 1 Gatekeeper Discovery: Manual
H323 Profile [1..1] H323Alias E164
The H.323 Alias E.164 defines the address of the system, according to the numbering plan implemented
in the H.323 Gatekeeper. The E.164 alias is equivalent to a telephone number, sometimes combined with
access codes.
Valuespace: <S: 0, 30>
Format: Compact string with a maximum of 30 characters. Valid characters are 0–9, * and #.
Example:
H323 Profile 1 H323Alias E164: "90550092"
Administrator guide
Appendices
Appendices
Contact us
Contact us
www.tandberg.com
Advertisement
Table of Contents
