Recommendations
•
•
•
•
Note: Tubes (cylinders and prisms) should not be oriented vertically.
•
•
20
Packages need to be placed at least partially within the measurement area (see
Set Measurement Area
Packages need to be placed fully on the platform in the camera's view. If not, an
error message will appear:
Black, shiny, and transparent packages are not supported.
The following irregular shapes are supported:
•
Tube
•
Triangular tube (prism)
•
Cubes with an uneven top, sloped top, uneven side
Stacked packages will be measured as one object.
Can be used in typical office lighting (200 - 9000 lux), avoid direct sunlight.
on page 14).
AutoCube 8200 User Guide