KRA 405B RADAR ALTIMETER INSTALLATION MANUAL
C.
ANTENNAS
(Refer to
through
2002-4
Refer to section 2.5.
additional information and suggestions relating to installation of
antennas.
(1)
(2)
2.8
HONEYWELL MAINTENANCE RECOMMENDATIONS
The KRA 405B Radar Altimeter System has been designed for "on-condition"
maintenance. For details relating to "on condition" maintenance, refer
to Honeywell Service Memo SM #292, P/N 600-08292-XXXX.
006-10536-0010 Rev. 10
N
b.
Re-attach mating cable to Cannon connector (P4151/
P4161) on the back of the unit.
FIGURE 2-8 KA 54 ANTENNA OUTLINE AND MOUNTING DRAWING
FIGURE 2-12 HONEYWELL GT 7003586 (SENSOR SYSTEMS TYPE S67-
ANTENNA))
E. IMPLEMENTING THE ANTENNA INSTALLATION
Removal
a.
Detach mating coaxial cable from antenna TNC connector.
b.
Remove the fasteners attaching the antenna to the air-
frame. (The number and pattern will vary depending on
antenna type, consult proper antenna mounting drawing
for details).
Re-installation
a.
Align antenna with panel mounting holes and secure with
fasteners. (The number and pattern will vary depending
on antenna type, consult proper antenna mounting draw-
ing for details).
b.
Re-attach mating coaxial cable to antenna TNC connec-
tor.
for
Page 2-24
Oct/2005