Advertisement
2-6. REMOVAL OF DD-91 BOARD
2 DD-91 board
(S terminal, 26-pin multi connector)
1 Three screws (M2 x 6)
DD-91 board
(Video terminal)
2-7. REMOVAL OF PD-71 BOARD, LIQUID CRYSTAL DISPLAY MODULE
1 Open the liquid crystal panel
in the arrow directioen.
!¡ PD-71 board
!™ Cold cathode fluorescent tube with
conductive light plate.
4 Remove the battery terminal board
in the arrow direction.
3 Two screws (M1.7 x 2.5)
!º Screw (M1.7 x 2.5)
5 PD ground plate
4 Screw (M1.7 x 2.5)
Note : Be careful not to damage the flexible board.
Cabinet bottom assembly
7 Two connectors
CN5600, 6P
CN5601, 11P
8 Flexible board
CN5801, 24P
2 Three screws (M1.7 x 4)
2 - 4
9 Liquid crystal display module
(LQ3FN31)
6 FP-484 flexible board
3 LCD case (Inner)
Advertisement
