Advertisement
6-1. CAMERA SECTION ADJUSTMENTS
When performing adjustments, refer to the layout
diagrams for adjustment related parts beginning from
page 6-30.
1-1.
PREPARATIONS BEFORE ADJUSTMENT
(CAMERA SECTION)
1-1-1. List of Service Tools
• Oscilloscope
• Vectorscope
Ref No.
Name
J-1
Filter for color temperature correction
(C14)
J-2
ND filter 1.0
ND filter 0.3
J-3
Pattern box PTB-450
J-4
Color chart for pattern box
J-5
Adjusting remote commander
(RM-95-remodeled partly)
J-6
Siemens star
J-7
CPC-6 jig
J-8
CPC-6 terminal board jig
J-9
I/O board -1 jig
J-10
Extension cable (18P, 0.5 mm)
J-11
Clear chart for pattern box
Note 1: If the micro processor IC in the adjusting remote commander is not the new micro processor (UPD7503G-C56-12), the pages cannot
be switched. In this case, replace with the new micro processor (8-759-148-35).
SECTION 6
ADJUSTMENTS
• Regulated power supply
• Digital voltmeter
Parts Code
J-6080-058-A
J-6080-808-A
J-6080-818-A
J-6082-200-A
J-6020-250-A
J-6082-053-B
Note 1
J-6080-875-A
J-6082-370-A
J-6082-371-A
J-6082-372-A
J-6082-374-A
J-6080-621-A
Note:
NTSC model : DCR-PC7
PAL model
: DCR-PC7E
• Color monitor
Auto white balance adjustment/check
White balance adjustment/check
White balance check
White balance check
For checking the flange back
For adjusting the video section
For adjusting the viewfinder
For adjusting the video section
For adjusting the viewfinder
For connecting the adjusting remote commander
For extension between the MR-36 board (CN3100) and the
capstan motor.
6-1
DCR-PC7/PC7E
Usage
Advertisement
