MOTO GUZZI NEVADA Service Station Manual page 70

Electrical system
•
Check the cable which goes from the battery positive to the fuse box to be sure it is covered
by the sheath and that the terminal is covered by the heat-shrink.
2. Battery negative
•
Check that the end of the engine ground leads is positioned as illustrated in the image and
that there is perfect surface contact once the screw is tightened.
3. Taillight connector
4. Speed sensor connector
5. Clamps
TABLE P1
1. Cable guide that secures the rear stop light ca-
ble and the rear brake caliper pipe
TABLE P2
1. Insert the cable tie to prevent the cables (right
and left turn indicators and license plate light) from
coming down in the hole.
2. Big clamp.
3. Taillight cable harness.
ELE SYS - 70
NEVADA - NEVADA ANNIVERSARIO