MOTO GUZZI NEVADA Service Station Manual page 145

NEVADA - NEVADA ANNIVERSARIO
•
Insert the cap and the well-lubricated
sealing ring on the bearing tube.
•
Use a suitable inserting tool to push the
sealing ring in the fork leg until it stops.
•
Fit the locking ring.
•
Fit the dust scraper.
•
Pour oil into the bearing tube so that it
also fills the internal grooves of the
pumping member rod.
•
Pump with the bearing tube, making
sure the oil has completely filled the
pumping member rod.
•
Introduce the spring and the preload
tube.
•
Place the cap on the bearing tube, tak-
ing care not to damage the O-ring.
Then, tighten the cap to the prescribed
torque.
Suspensions
SUSP - 145