MOTO GUZZI NEVADA Service Station Manual page 61

NEVADA - NEVADA ANNIVERSARIO
16.Check the presence of the Pull Up module and the presence of the black hose under the trans-
parent one.
17.Check the Pick Up connection.
18.Check correct insertion of the starter motor hood
19.Check the presence of the Red protective hood on the battery Positive.
20.Check that the stand switch connector is blue and clamped.
21.Check the side stand connection and left lambda.
22.Check that the H.V. cables are connected well to with the NGK plug caps.
23.Check the stand switch cable ties on the frame under the vehicle
•
THE CIRCLED CONNECTORS ARE DEEMED MORE CRITICAL THAN THE OTHERS
BECAUSE DISCONNECTION OF THESE MAY CAUSE THE VEHICLE TO STOP.
•
Undoubtedly the connection of the rest of connectors is also important and essential for the
correct operation of the vehicle.
Front side
TABLE A
1. Main cable harness
2. Clamp that secures the main cabling to the
headlamp support plate
3. Ambient temperature sensor
4. Clamp that secures the ambient temperature
sensor to the front headlamp support plate
5. GPS wiring connector
6. Front headlamp connector
Electrical system
ELE SYS - 61