MOTO GUZZI NEVADA Service Station Manual page 146

Suspensions
Filling oil
•
Place the sleeve upright in a vice fitted
with protection jaws.
•
Compress the sleeve in the stanchion.
•
Pour part of the fork oil into the sleeve.
•
Wait some minutes until the oil fills all
the ducts.
•
Pour the remaining oil.
•
Pump out oil a few times.
•
Measure the air gap between the oil
level and the rim.
THE SLEEVE MUST BE PERFECTLY UPRIGHT IN ORDER
TO MEASURE THE CORRECT OIL LEVEL. THE OIL LEVEL
MUST BE THE SAME IN BOTH STANCHIONS.
Characteristic
Marzocchi Oil level (from the sleeve edge, with-
out the spring and with stanchion to end of
stroke)
150 mm (5.9 in)
Kaifa Oil level (from the sleeve edge, without
the spring and with stanchion to end of stroke)
120 +/- 1.5 mm (4.72 +/- 0.06 in)
•
Introduce the spring and the preload
tube.
SUSP - 146
NEVADA - NEVADA ANNIVERSARIO