MOTO GUZZI NEVADA Service Station Manual page 142

Suspensions
•
Remove the dust scraper using a
screwdriver as a lever.
CAUTION
BE CAREFUL NOT TO DAMAGE THE FORK LEG RIM AND
THE DUST SCRAPER.
•
Slide the dust scraper off and upwards.
•
Remove the locking ring inside the fork
leg using a thin screwdriver.
CAUTION
BE CAREFUL NOT TO DAMAGE THE FORK LEG RIM.
•
Slide off the bearing tube from the
wheel holder fork leg together with the
sealing ring, the cap, the upper bush-
ing and lower bushings.
NOTE
WHEN REMOVING THE PIPE FROM THE WHEEL HOLDER
FORK LEG SOME PARTS MAY REMAIN INSIDE THE FORK
LEG. IF THIS OCCURS, THESE PARTS MUST BE RE-
MOVED AFTERWARDS, BEING CAREFUL NOT TO DAM-
AGE THE FORK LEG RIM AND THE UPPER BUSHING
SEAT
SUSP - 142
NEVADA - NEVADA ANNIVERSARIO