Icare HOME Instruction Manual page 36

Icare HOME tonometer Instruction manual for health care professionals
Icare HOME tonometer Instruction manual for health care professionals
7. Show and explain how to collect, display and store the results (for HCPs only):
•
• Connect the tonometer to the PC using the USB cable. The Load and
•
PC's time by the Icare LINK software at this point).
•
• Copy the results to a selected patient (it can be the default patient "-
New patient-" that you can rename afterwards).
• The Measurements tab opens showing the copied results with date
and time information that all is now stored to the PC.
STEP 3 – Rehearsal
1. Position the tonometer on your (HCP trainer) own eye.
2.
3.
measurements as instructed and demonstrated.
4.
again.
5.
STEP 4 – Reference measurement
1. Load a new probe and carefully measure the IOP of the HCP with the tonometer once
in each eye.
ENGLISH www.icare-usa.com
www.icaretonometer.com
36
English