Filling The Filling Chamber; Filling Aid; Filling The Filling Chamber Using The Filling Aid; Application - Storz & Bickel GMBH Crafty Instructions For Use Manual

8 . F I L L I N G T H E F I L L I N G C H A M B E R

8.2. Filling the Filling Chamber

Using the Filling Aid
Remove the Cooling Unit from the Va-
porizer and remove any residues that
may be in the Filling Chamber. The
Filling Chamber Tool can be a help in
doing this.
Remove the lower cap of the Filling Aid
by turning counterclockwise. Place the
Filling Aid on the Vaporizer and attach
by turning it clockwise. Remove the
upper cap from the Filling Aid. Pull the
plug and use it to fill a portion of plant
material through the central opening
into the Filling Chamber.
Make sure that the Filling
Chamber is not overfilled (see
Section 8. "Filling the Filling
Chamber").
Fill the Filling Aid to the lower rim (see
the two following drawings)!
Overfilling leads to clogging of the
Screens and can make inhaling more
difficult.
Filling the Filling Chamber with the Filling Aid
The lower rim of the Filling Aid must be
above the top level of the plant material
Then re-insert the plug into the central
opening and screw on the upper cap of
the Filling Aid. Unscrew the Filling Aid
with a 90° rotation and screw on the
lower cap again. Then re-mount the
Cooling Unit by rotating it clockwise
through 90°.
20
9 . A P P L I C AT I O N
Mount the Cooling Unit on the Vaporiz-
er and heat up. This ensures that both
the Filling Chamber and the material
to be vaporized are preheated and the
vaporizing can begin as soon as the
heating process is completed.
Caution! Hot surface!
After using the CRAFTY Va-
porizer, do not touch the Fill-
ing Chamber until it has cooled down
again.
Once the Vaporizer has reached the
set temperature (steady green light
for the basic temperature and flash-
ing green for the booster temperature,
each also accompanied by a short
double vibration) and the Mouthpiece
is folded out, then the inhaling process
may begin.
Using the CRAFTY Vaporizer
Take the Mouthpiece between the lips,
and inhale slowly and evenly for sev-
eral seconds.
Please note the following about vapor
generation: the more intense the va-
pors, the greater the impairment of the
flavor.
A very high intensity (or den-
sity) of the vapor can lead to
irritation of the respiratory
passages from the concentration of
the aromas and fragrances.
In this case, the temperature should
be lowered, so that the intensity of
the vapors is reduced (see Section
11.4. "Setting Temperature with the
CRAFTY App").
The device is not to be used, if
the user has respiratory tract
or lung conditions. Depend-
ing on the density, the vapor could ir-
ritate respiratory tracts or lungs,
which can lead to coughing.
Inhale only half the amount of
air you can normally manage.
Hold your breath for a few sec-
onds and exhale slowly. It is advisable
to deliberately concentrate on your
breathing process.
After vaporization, turn off
CRAFTY Vaporizer. To do this, press
the orange ON/OFF switch for at least
half a second. The Vaporizer acknowl-
edges the switching off with a short
vibration.
Allow the Vaporizer to cool down be-
fore it is packed away.
21
the