Filling The Filling Chamber Using The Filling Aid - Storz & Bickel GMBH Mighty Instructions For Use Manual

8 . F I L L I N G T H E F I L L I N G C H A M B E R
8.2. Filling the filling chamber us-
ing the filling aid
Remove the cooling unit from the va-
porizer and remove any residues that
may be in the filling chamber. The fill-
ing chamber tool can be a help in do-
ing this.
Remove the lower cap of the filling aid
by turning counterclockwise. Place
the filling aid on the vaporizer and at-
tach by turning it clockwise. Remove
the upper cap from the filling aid. Pull
the plug and use it to fill a portion of
plant material through the central
opening into the filling chamber.
Make sure that the filling
chamber is not overfilled (see
Section 8. "Filling the filling
chamber").
Fill the filling aid to the lower rim (see
drawing to the right "The lower rim
of the filling aid must be above the
top level of the plant material")!
Overfilling leads to clogging of the
screens and can make inhaling more
difficult.
Filling the filling chamber with the filling aid
The lower rim of the filling aid must be above
the top level of the plant material
Then re-insert the plug into the central
opening and screw on the upper cap
of the filling aid. Unscrew the filling aid
with a 90° rotation and screw on the
lower cap again. Then re-mount the
cooling unit by rotating it clockwise
through 90°.
20