Using the Filling Aid ............21 9. Application ................22 10. Disassembling, Cleaning and Assembling ......23 10.1. Disassembling and Reassembling the MIGHTY Cooling Unit ..........24 10.2. Cleaning the MIGHTY Cooling Unit ......26 10.3. Removal of the Lower Filling Chamber Screen ... 26...
Page 3
1. PRODUCT OVERVIEW MIGHTY VAPORIZER 1. PRODUCT OVERVIEW MIGHTY VAPORIZER Scope of Delivery: MIGHTY Vaporizer functional elements: Mouthpiece Filling Chamber Cooling Unit MIGHTY Vaporizer Instructions Actual Temperature Display for Use Power Adapter Minus Temperature Button Plus Temperature Button 1 Set of Spare...
Page 4
These Instructions for Use are a You may download the current In- Do not touch metal parts! significant part of the Vaporizer structions for Use for the MIGHTY and power adapter and must be on www.storz-bickel.com. provided to the user.
Page 5
2. SAFET Y RECOMMENDATIONS 2. SAFET Y RECOMMENDATIONS Safety Recommendations the cord). It must not be exposed Do not operate the Vaporizer close The Filling Chamber is made of to any impacts and must be kept to flammable objects such as metal;...
The device may only be used with the It is important to observe the following recommended vaporizing media. The instructions in order to set the MIGHTY Please consult your doctor or use of other substances can present Vaporizer with the plant material in the pharmacist if you have any a health risk.
6. THE M IGHTY VAPORIZER 5. FACTORS INFLUENCING VAPORIZ ATION Power Connection The amount of aromas and fragrances Please note: Increasing the tempera- After using the Vaporizer and power released can be influenced by the fol- ture should be the last resort, because adapter, allow them to cool down be- Before connecting up the Vaporizer, lowing factors:...
The Vaporiz- MIGHTY cannot be Please ensure that the MIGHTY’s battery is charged or ble surface, never on soft surfaces or er may not be charged and neither switched on.
40°C and 210°C (104°F and 410°F) pressed, the set values start running Storz & Bickel when the MIGHTY Va- factory: The basic temperature at (see Chapter 4. “Overview of Plants”, continuously in the corresponding di- porizer is sent in to them.
OFF button for ten seconds while the vaporization material, so that no va- MIGHTY Vaporizer is switched on. If porization can occur. the ON/OFF button has been pressed for ten seconds, the signaling of the Removal of Cooling Unit (with Mouthpiece) reset is made by vibration.
8. FILLING THE FILLING CHAMBER 8. FILLING THE FILLING CHAMBER 8.2. Filling the Filling Chamber Us- Take care that the Screens are not obstructed with plant ing the Filling Aid material. To guarantee opti- Upper Remove the Cooling Unit from the Va- mal results, we recommend cleaning porizer and remove any residues that the Screens after each vaporization...
Fill- In this case, the temperature should ing Chamber until it has cooled down be lowered, so that the intensity of the Product Overview of the MIGHTY Cooling Unit again. vapors is reduced. Once the Vaporizer has reached the...
10. DISASSEMBLING, CLEANING AND ASSEMBLING 10.1. Disassembling and Reas- Remove the Cap Lock from the cap by Push the upper Screen downwards sembling the MIGHTY Cooling pulling up at one side. out of the Filling Chamber Cap from Unit above by using the Filling Chamber If the Cooling Unit must be im- Tool supplied.
10. DISASSEMBLING, CLEANING AND ASSEMBLING 11. ACCESSORIES 10.2. Cleaning the MIGHTY Cooling 11.1. Dosing Capsules and Magazin Grind the plant material and fill the Do not immerse any plastic Unit Dosing Capsule by using the Maga- components in alcohol or eth- zine Cap (funnel).
90°. Turn the Cooling Unit with a 90° rota- the desired amount of Dosing Cap- The Filling Chamber of the MIGHTY tion counterclockwise in order to re- sules is filled and insert them into the move it from the MIGHTY Vaporizer.
The Lip Piece is equipped use of damaged and/or contaminated with a check valve. This check The voltage details are located on the respective type labels of the MIGHTY products respectively is the user’s re- valve reduces the danger of a Vaporizer and power adapter.
The warranty period for the MIGHTY terioration, including, but not limited Vaporizer begins on the date when the to, defects in batteries, Screens and Product is physically delivered to the similar parts subject to wear and tear.
Page 18
14. WARR ANT Y, LIABILIT Y, REPAIR SERVICE 14. WARR ANT Y, LIABILIT Y, REPAIR SERVICE Liability Repair Service All requests and notices from U.S. the risks between Company and Cus- and Canadian customers under this tomer, that Company’s pricing reflects After the warranty period has expired, Handling of these Products is to be as warranty shall be directed to:...
Page 19
S TO R Z & B I C K E L G M B H & C O. K G In Grubenäcker 5-9 · 78532 Tuttlingen/Germany S TO R Z & B I C K E L A M E R I C A I N C. 1078 60th St.