Table of Contents
Advertisement
9. EASY VALVE
Disassembling the Filling
Chamber
Push the lower Screen or the Liquid
Pad upwards out of the Filling Cham-
ber Cylinder. Push the Filling Cham-
ber Cylinder upwards out of the Filling
Chamber Housing.
Push the Filling Chamber Cylinder upwards
out of the Filling Chamber Housing
When the Filling Chamber Cylinder is
pushed out, the three Filling Chamber
Clips are loosened and fall out of the
Filling Chamber Housing.
Lower Screen
Filling Chamber
Cylinder
Filling Chamber
Housing
3 pcs. Filling
Chamber Clips
Assembling the Filling Chamber
Push the Filling Chamber Cylinder
from above into the Filling Chamber
Housing and allow it to lock in place.
Insert the Filling Chamber Clips in the
openings provided for them in the foot
of the Filling Chamber Housing.
Make sure the Filling Chamber Clips
are placed properly, as shown in the il-
lustration.
Filling Chamber Cylinder
Filling Chamber
Housing
Filling
Chamber Clip
Insert Filling Chamber Clips
Insert the Screen or the Liquid Pad
into the Filling Chamber from above.
Screw Filling Chamber Cap on Filling
Chamber.
26
9. EASY VALVE
9.3. Accessories
9.3.1. Filling Chamber Reducer
Suitable for vaporizing small
amounts of plant material, is
the Filling Chamber Reducer,
which is available as an accessory,
along with the Dosing Capsules. For
vaporizing small amounts of aromatic
oils, the small Liquid Pad is to be used
additionally.
The Filling Chamber Reducer is in-
serted instead of the Filling Chamber
Cylinder (see Chapters "Disassem-
bling the Filling Chamber" and "As-
sembling the Filling Chamber", page
26 onwards).
Filling the Filling Chamber Re-
ducer with ground Plant Material
The Filling Chamber Reducer can be
filled with ground plant material directly.
Dosing Capsules containing ground
plant material can be inserted into the
Filling Chamber Reducer as well.
Fill the Filling Chamber Reducer with
ground plant material directly or with a filled
Dosing Capsule
Filling the Filling Chamber Re-
ducer with aromatic Oils
Either the small Liquid Pad (measure-
ments 15 x 5 mm / 0.6 x 0.2 inch) or the
Dosing Capsule containing a Liquid
Pad (measurements 13 x 6 mm / 0.5
x 0.2 inch) are to be inserted into the
Filling Chamber Reducer.
Insert either a small Liquid Pad directly into
the Filling Chamber Reducer or a Dosing
Capsule equipped with a Liquid Pad
Please make sure to not over-
fill the Liquid Pad. It can con-
tain up to 5 drops.
For details on how to use the
Liquid Pad, please refer to
Chapter 12. "Liquid Pad",
page 43.
27
Hide quick links:
Advertisement
Table of Contents
