Table of Contents
Advertisement
8. FILLING THE FILLING CHAMBER
Turn the Filling Chamber Cap coun-
terclockwise in order to remove it from
the Filling Chamber.
Removal of the Filling
Chamber Cap with Cooling Coil
Remove the Filling Chamber Cap with
Cooling Coil and Mouthpiece from the
Filling Chamber.
Always fill the Filling Chamber com-
pletely with finely crushed or ground
plant material.
Always fill the Filling Chamber completely up
to the upper edge
Always fill the Filling Chamber
completely up to the upper
edge. This prevents the va-
porization material from shifting when
the Hot Air Generator is not held up-
right, which would make efficient va-
porization impossible, since the hot air
could then bypass the vaporization
material.
18
8. FILLING THE FILLING CHAMBER
correct
Completely filled FIlling Chamber
The Filling Chamber must always be
filled completely, so that the vaporiza-
tion material cannot shift around, no
matter how the Hot Air Generator is
held.
vapor
Uniform flow through the
vaporization material
19
Advertisement
Table of Contents
