Storing A Position - Humanscale eFloat Installation Instructions Manual

D I G I TA L T O U C H PA D B A S I C F U N C T I O N S
Moving the desktop UP and DOWN
• To move the table UP press and hold the UP BUTTON. Desktop will begin moving upward. Release button once the desired
desktop height is reached.
• To move the table DOWN press and hold the DOWN BUTTON. Desktop will begin moving downward. Release button once the
desired desktop height is reached.
Note: The desktop will stop moving at the lower or upper limit position regardless of whether the up or down button is released. If a collision occurs, the
controller will immediately reverse the direction of desktop movement for a brief period of time to prevent damage to objects or surroundings.
D I G I TA L T O U C H PA D A D VA N C E D F U N C T I O N S

Storing a position

• Move the desk to the position you want to store.
• The display reads the actual height of the desk (e.g. 29").
• Press the memory button, S.
• The display will read "S –".
• Press the position button of choice (e.g. Position 2).
• The display reads "S 2".
• The controller will click twice when the position is stored. After 2 seconds the stored height will be displayed.
Recalling a saved position manually
• Press and hold the desired position button (e.g. Position 2).
• The desk moves until the saved position is reached. If you release the
button before reaching the saved position, the desk stops and the
saved position will not be reached.
• When the desk has reached the saved height release the position button.
• The display will read the actual desk height.
9