Juniper EX2300-C Hardware Manual page 60

EX2300-C and EX2300 Switches Hardware Guide
Table 20: Chassis Viewer for EX3200, EX3300, and EX4200 Switches (continued)
Field
Interface status
LCD panel
Rear View of the EX3200 Switch
Management ( ) port
me0
Console port
USB port
Fan tray
Power supply
Rear View of the EX3300 and EX4200 Switch
Fan tray
Virtual Chassis port
38
Description
In the image, the following colors denote the interface status:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
For a Virtual Chassis configuration, select the switch to view the interface status.
If an SFP+ uplink module is installed in the switch, mouse over the port icon to display whether
the module is configured to operate in 1-gigabit mode or in 10-gigabit mode. If the module is
configured to operate in 1-gigabit mode, the tool tip information is displayed for all 4 ports. If the
module is configured to operate in 10-gigabit mode, the tool tip information is displayed only for
2 ports.
On an EX3300 switch with the 4x GE/XE SFP+ module, mouse over the port icon to display
whether the module is configured to operate in 1-gigabit mode or 10-gigabit mode.
For SFP, SFP+, and XFP ports, the interfaces appear dimmed if no transceiver is inserted. The
chassis viewer displays
Transceiver not plugged-in
LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current character
display.
The management port is used to connect the switch to a management device for out-of-band
management.
The console port is used to connect the switch to a management console or to a console server.
(You might do this for initial switch configuration.)
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks for your
EX Series switch.
Mouse over the fan tray icon to display name, status, and description information.
Mouse over the power supply icon to display name, status, and description information.
Mouse over the fan tray icon to display name, status, and description information. For a Virtual
Chassis, the status of the fans of the selected member switch is displayed.
Displayed only when EX4200 switches are configured as a Virtual Chassis. The following colors
denote the Virtual Chassis port (VCP) status:
Green—VCP is up and operational.
Yellow—VCP is up but is nonoperational.
Gray—VCP is down and nonoperational.
when you mouse over the port icon.
Copyright © 2017, Juniper Networks, Inc.